QR Code Asset Tags vs Handwritten Labels

Simple Asset Tracker Team · · Updated · 4 min read

A marker-pen number on the back of a monitor feels good enough right up until an auditor asks you to find it, or you discover that two monitors carry the same number. By then, fixing it properly usually means relabelling everything, and if you're relabelling anyway, QR code asset tags are the better choice.

What an asset label actually has to do

An asset label is the link between a physical object and its line in your fixed asset register. Every process starts with it: verifying the asset, issuing a laptop to a new joiner, logging a repair, writing something off. If the label can't be read or matched, each of those jobs starts with a hunt through the register.

Plenty of organisations still rely on handwriting. Marker pen on the casing, a sticker with a number written on it, sometimes an engraved code. It costs almost nothing to start, which is exactly why it's so common. The trouble usually shows up during physical verification.

Why handwritten labels let you down

Ink fades, stickers peel and cleaning sprays take marker pen off with them, and a label nobody can read is no better than no label. Even when a label survives, somebody still has to read it. Is that a 1 or a 7? An O or a zero? During a count, a misread ID looks exactly like a missing asset.

Then the formats drift. Different people, sites and years turn one numbering scheme into IT-0042, IT42 and 42/IT, which makes matching labels to the register tedious. Without a system handing out the numbers, duplicates creep in, and nobody notices until the count.

The deeper problem is that a handwritten number only tells you what to type. It can't open the asset's record or show who has it and when it was last checked, so every job that touches it takes longer than it should.

What changes with QR code asset tags

A QR code asset tag is a label with a printed QR code holding the asset's unique ID, usually with the same ID in plain text beside it and your organisation's name. The code doesn't store the whole record. It just points to the right one: scan it with your asset software on any phone and that asset's record comes up straight away.

That single change fixes most of the problems above. A scan reads the exact ID or nothing at all, so swapped digits and typos disappear. It takes about a second, which adds up quickly across a few hundred assets. The same tag works for physical verification and for issuing and recovering IT equipment. And because the app records whether an asset was scanned or picked from a list, the verification record is stronger evidence for an auditor than a tick on a sheet.

You don't need special hardware either. Barcode guns and RFID readers cost money, and the handheld ones have to be charged and handed out. QR codes can be read with the phones your team already carries.

QR code, barcode or RFID?

 Linear barcodeQR codeRFID tag
Read with an ordinary phoneSometimes, less reliablyYesNo, needs a reader
Copes with scuffs and damageLess wellWell (built-in error correction)Well
Needs line of sightYesYesNo, and reads many at once
Cost per tagVery lowVery lowHigher

For most offices, schools, hospitals and factories we'd pick QR codes. They're almost free to print, any phone can read them, and a scuffed label usually still scans. RFID earns its cost when you need to read lots of items at once without seeing them.

How to label assets so the labels last

Most label problems come down to material and placement. Pick the material for the environment: plain labels are fine for office kit, while workshops, outdoor assets and anything that gets cleaned often need polyester or metal tags. Always print the ID in plain text next to the code so a damaged label can still be read by eye, and add your organisation's name. It deters theft and helps lost items find their way back.

Put labels in the same spot on each type of asset, somewhere visible without moving it, and never on a removable part like a detachable panel. Leave a clear margin around the code and test-scan a sample before printing a thousand. It's also worth deciding up front whether to tag portable items that fall below your capitalisation threshold, such as phones and monitors. They usually won't be on the fixed asset register, but they're exactly the things that go missing.

Most important of all, generate labels from the register rather than writing IDs by hand, and track each one until it's actually on the asset. In Simple Asset Tracker, asset tag owners print QR labels for the assets assigned to them straight from the register and mark each one printed, then affixed, while the dashboard shows how many assets are still waiting for a label. Your next count then doubles as a check that every tag scans. We explain that side in paper vs digital physical verification.

If your assets carry marker-pen numbers today, start small. Print QR tags for one room, stick them on and scan them back. You can try it with Simple Asset Tracker for free on up to 30 assets.

Try it on your own assets

Simple Asset Tracker runs on your own computer or server. Import your register, print QR asset tags and run a verification from any phone. It's free for up to 30 assets.